Powerig®
HUCK offers POWERIG® hydraulic power units for both in-plant and on-site use. Available in a choice of petrol or electric power, there is a POWERIG available to deliver a hydraulic flow rate ranging from 1.15 to 11.6 litres per minute.
HK432-2 - 3 phase electric
The very popular HK432-2, 3 phase electric Powerig is suitable for use with most Huck installation tools. It’s built in wheels and detachable handle together with compact size, make this unit easy to move between work stations. It also features a built in temperature switch to prevent the unit being used when the hydraulic oil level is too low. The Powerig automatically starts when the installation tool trigger is activated and stops when the installation tool cycle is complete.
Can be used will all hydraulic installation tools except Huck-Spin & Bobtail types.
HK432CF
3 phase electric, portable design with thermostatic electric cooling fan. Can be used will all hydraulic installation tools except Huck-Spin & Bobtail types.
HK432HS
3 phase electric, portable design for use with all Huck-Spin installation tools.
Download Datasheet 
HK432CS SureSet system
Powerig with integrated process control system checks the integrity of every fastener installed to ensure optimum installation.
Download Datasheet 
HK3413 - Single phase 230/240 VAC electric
Single phase 230/240 VAC electric, compact lightweight design for low volume production. Can be used with all hydraulic installation tools except Huck-Spin & Bobtail types.
HK3413/110 - single phase 110/115 VAC electric, compact lightweight design for low volume production. Can be used with all hydraulic installation tools except Huck-Spin & Bobtail types.
Download Datasheet 
HK4245
3 phase electric, portable design with two switchable/adjustable Pull Pressures. Can be used will all hydraulic installation tools except Huck-Spin & Bobtail types.
Download Datasheet 
HP74 Series
3 phase electric high flow pump. Can be used will all hydraulic installation tools except Huck-Spin & Bobtail types.
Download Datasheet HP742
3 phase electric high flow pump; two tool operation. Can be used will all hydraulic installation tools except Huck-Spin & Bobtail types.
Download Datasheet 
PP275/40
Compact lightweight 4 stroke engine, manual valves. Ideal alternative to handpump for rail track work. Can also be used for cold hole expansion.
Download Datasheet 
911D Diesel Powerig®
The new 911D Huck® diesel engine Powerig® from Alcoa Fastening Systems, allows the installation of Huck fasteners in any environment without requiring a 3 phase power supply. It is therefore ideally suited to rail track, bridge, constuction, fencing and maintenance / repair applications.
It can be used with a wide range of Huck hydraulic Installation tools including the Bobtail tooling suite for the new Huck BobTail LockBolt. The maximum Pull Pressure is 700 bar (10150 psi) and the maximum Return Pressure is 400 bar (5800 psi). The Powerig is equipped with a 12 vdc Battery and an electric Starter Motor operated by a Key Switch.
The Engine and Pump run continuously and a low hydraulic pressure, (Idle Pressure), ensures that the Tool Piston is kept in the forward position when the Tool is not being used. The Installation Tool is connected to the Powerig by means of Pull and Return pressure Hydraulic Hoses and an electrical Control Cord. The Powerig Hydraulic Directional Valve (HDV), is controlled from the Installation Tool Trigger by a 12 VDC remote control circuit.